Microsoft.VisualStudio.TestPlatform.TestFramework
Tries to parse a string into a value.
Tries to parse a span of characters into a value.
Tries to parse a span of characters into a value.
Tries to parse a span of characters into a value.
Tries to parse a span of characters into a value.
Tries to parse a span of characters into a value.
Tries to parse a string into a value.
Tries to parse a span of characters into a value.
Tries to parse a span of characters into a value.
Tries to parse a span of characters into a value.
Tries to parse a span of characters into a value.
Tries to parse a span of characters into a value.
Gets an enumerator for the invocation targets of this delegate.
Retrieves an array of the values of the constants in a specified enumeration type.
An array that contains the values of the constants in TEnum.
Returns a telling whether a given integral value exists in a specified enumeration.
The type of the enumeration.
The value in .
if a given integral value exists in a specified enumeration; , otherwise.
Retrieves an array of the names of the constants in a specified enumeration type.
A string array of the names of the constants in TEnum.
Converts the string representation of the name or numeric value of one or more enumerated constants specified by TEnum to an equivalent enumerated object.
Converts the string representation of the name or numeric value of one or more enumerated constants specified by TEnum to an equivalent enumerated object.
Converts the span of characters representation of the name or numeric value of one or more enumerated constants specified by TEnum to an equivalent enumerated object.
Converts the span of characters representation of the name or numeric value of one or more enumerated constants specified by TEnum to an equivalent enumerated object.
Converts the string representation of the name or numeric value of one or more enumerated constants to an equivalent enumerated object.
Converts the string representation of the name or numeric value of one or more enumerated constants to an equivalent enumerated object. A parameter specifies whether the operation is case-sensitive. The return value indicates whether the conversion succeeded.
Tries to parse a string into a value.
Creates a new according to RFC 9562, following the Version 7 format.
A new according to RFC 9562, following the Version 7 format.
Creates a new according to RFC 9562, following the Version 7 format.
The date time offset used to determine the Unix Epoch timestamp.
A new according to RFC 9562, following the Version 7 format.
Converts span of characters representing the GUID to the equivalent Guid structure, provided that the string is in the specified format.
Tries to parse a span of UTF-8 characters into a value.
Tries to parse a span of UTF-8 characters into a value.
Tries to parse a string into a value.
Tries to parse a span of UTF-8 characters into a value.
Converts the span representation of a number in a specified style and culture-specific format to its byte equivalent. A return value indicates whether the conversion succeeded.
Tries to parse a span of characters into a value.
Tries to parse a span of UTF-8 characters into a value.
Tries to convert a UTF-8 character span containing the string representation of a number to its byte equivalent.
Converts the span representation of a number in a specified style and culture-specific format to its byte equivalent. A return value indicates whether the conversion succeeded.
Tries to parse a string into a value.
Tries to parse a span of UTF-8 characters into a value.
Converts the span representation of a number in a specified style and culture-specific format to its double-precision floating-point number equivalent. A return value indicates whether the conversion succeeded or failed.
Tries to parse a span of characters into a value.
Tries to parse a span of UTF-8 characters into a value.
Tries to convert a UTF-8 character span containing the string representation of a number to its double-precision floating-point number equivalent..
Converts the string representation of a number in a specified style and culture-specific format to its double-precision floating-point number equivalent. A return value indicates whether the conversion succeeded or failed.
Tries to parse a string into a value.
Tries to parse a span of UTF-8 characters into a value.
Converts the span representation of a number in a specified style and culture-specific format to its 32-bit signed integer equivalent. A return value indicates whether the conversion succeeded.
Tries to parse a span of characters into a value.
Tries to parse a span of UTF-8 characters into a value.
Tries to convert a UTF-8 character span containing the string representation of a number to its 32-bit signed integer equivalent.
Converts the span representation of a number in a specified style and culture-specific format to its 32-bit signed integer equivalent. A return value indicates whether the conversion succeeded.
Tries to parse a string into a value.
Tries to parse a span of UTF-8 characters into a value.
Converts the span representation of a number in a specified style and culture-specific format to its 32-bit signed integer equivalent. A return value indicates whether the conversion succeeded.
Tries to parse a span of characters into a value.
Tries to parse a span of UTF-8 characters into a value.
Tries to convert a UTF-8 character span containing the string representation of a number to its 64-bit signed integer equivalent.
Converts the span representation of a number in a specified style and culture-specific format to its 64-bit signed integer equivalent. A return value indicates whether the conversion succeeded.
Tries to parse a string into a value.
Tries to parse a span of UTF-8 characters into a value.
Converts the span representation of a number in a specified style and culture-specific format to its sbyte equivalent. A return value indicates whether the conversion succeeded.
Tries to parse a span of characters into a value.
Tries to parse a span of UTF-8 characters into a value.
Tries to convert a UTF-8 character span containing the string representation of a number to its sbyte equivalent.
Converts the span representation of a number in a specified style and culture-specific format to its sbyte equivalent. A return value indicates whether the conversion succeeded.
Tries to parse a string into a value.
Tries to parse a span of UTF-8 characters into a value.
Converts the span representation of a number in a specified style and culture-specific format to its short equivalent. A return value indicates whether the conversion succeeded.
Tries to parse a span of characters into a value.
Tries to parse a span of UTF-8 characters into a value.
Tries to convert a UTF-8 character span containing the string representation of a number to its short equivalent.
Converts the span representation of a number in a specified style and culture-specific format to its short equivalent. A return value indicates whether the conversion succeeded.
Tries to parse a string into a value.
Tries to parse a span of UTF-8 characters into a value.
Converts the span representation of a number in a specified style and culture-specific format to its uint equivalent. A return value indicates whether the conversion succeeded.
Tries to parse a span of characters into a value.
Tries to parse a span of UTF-8 characters into a value.
Tries to convert a UTF-8 character span containing the string representation of a number to its uint equivalent.
Converts the span representation of a number in a specified style and culture-specific format to its uint equivalent. A return value indicates whether the conversion succeeded.
Tries to parse a string into a value.
Tries to parse a span of UTF-8 characters into a value.
Converts the span representation of a number in a specified style and culture-specific format to its ulong equivalent. A return value indicates whether the conversion succeeded.
Tries to parse a span of characters into a value.
Tries to parse a span of UTF-8 characters into a value.
Tries to convert a UTF-8 character span containing the string representation of a number to its ulong equivalent.
Converts the span representation of a number in a specified style and culture-specific format to its ulong equivalent. A return value indicates whether the conversion succeeded.
Tries to parse a string into a value.
Tries to parse a span of UTF-8 characters into a value.
Converts the span representation of a number in a specified style and culture-specific format to its ushort equivalent. A return value indicates whether the conversion succeeded.
Tries to parse a span of characters into a value.
Tries to parse a span of UTF-8 characters into a value.
Tries to convert a UTF-8 character span containing the string representation of a number to its ushort equivalent.
Converts the span representation of a number in a specified style and culture-specific format to its ushort equivalent. A return value indicates whether the conversion succeeded.
Returns the directory information for the specified path represented by a character span.
The path to retrieve the directory information from.
Returns the file name and extension of a file path that is represented by a read-only character span.
A read-only span that contains the path from which to obtain the file name and extension.
The characters after the last directory separator character in path.
Returns the file name without the extension of a file path that is represented by a read-only character span.
A read-only span that contains the path from which to obtain the file name without the extension.
Determines whether the path represented by the specified character span includes a file name extension.
The path to search for an extension.
true if the characters that follow the last directory separator character or volume separator in the path include a period (".") followed by one or more characters; otherwise, false.
Returns the extension of the given path.
Combines a span of strings into a path.
A span of parts of the path.
The combined paths.
Returns a value that indicates whether the path, specified as a read-only span, ends in a directory separator.
The path to analyze.
true if the path ends in a directory separator; otherwise, false.
Trims one trailing directory separator beyond the root of the specified path.
The path to trim.
The path without any trailing directory separators.
Returns a value that indicates whether the specified path ends in a directory separator.
The path to analyze.
true if the path ends in a directory separator; otherwise, false.
Trims one trailing directory separator beyond the root of the specified path.
The path to trim.
The path without any trailing directory separators.
Gets a value that indicates whether the Delegate has a single invocation target.
Produces a set items excluding by using the default equality comparer to compare values.
An whose elements that are not equal to will be returned.
An that is elements equal it will cause those elements to be removed from the returned sequence.
The type of the elements of .
A sequence that contains the items of but excluding .
Produces a set items excluding by using to compare values.
An whose elements that are not equal to will be returned.
An that is elements equal it will cause those elements to be removed from the returned sequence.
An to compare values.
The type of the elements of .
A sequence that contains the items of but excluding .
Produces the set difference of two sequences by to compare values.
An whose elements that are not equal to will be returned.
An that is elements equal it will cause those elements to be removed from the returned sequence.
The type of the elements of .
A sequence that contains the items of but excluding .
Gets the nanosecond component of the time represented by the current object.
Gets the nanosecond component of the time represented by the current object.
Gets the nanosecond component of the time represented by the current object.
Gets the microsecond component of the time represented by the current object.
Gets the microsecond component of the time represented by the current object.
Gets the microsecond component of the time represented by the current object.
Appends the specified interpolated string to this instance.
The interpolated string to append.
A reference to this instance after the append operation has completed.
Appends the specified interpolated string to this instance.
An object that supplies culture-specific formatting information.
The interpolated string to append.
A reference to this instance after the append operation has completed.
Appends the specified interpolated string followed by the default line terminator to the end of the current StringBuilder object.
The interpolated string to append.
A reference to this instance after the append operation has completed.
Appends the specified interpolated string followed by the default line terminator to the end of the current StringBuilder object.
An object that supplies culture-specific formatting information.
The interpolated string to append.
A reference to this instance after the append operation has completed.
Gets a value that indicates whether the current Type represents a type parameter in the definition of a generic method.
Generic version of Type.IsAssignableTo https://learn.microsoft.com/en-us/dotnet/api/system.type.isassignableto.
Generic version of Type.IsAssignableFrom https://learn.microsoft.com/en-us/dotnet/api/system.type.isassignablefrom.
Provides a thread-safe Random instance that may be used concurrently from any thread.
Indicates whether the specified regular expression finds a match in the specified input span, using the specified matching options and time-out interval.
true if the regular expression finds a match; otherwise, false.
Indicates whether the specified regular expression finds a match in the specified input span, using the specified matching options.
true if the regular expression finds a match; otherwise, false.
Indicates whether the specified regular expression finds a match in the specified input span.
true if the regular expression finds a match; otherwise, false.
Searches an input span for all occurrences of a regular expression and returns a Regex.ValueMatchEnumerator to iterate over the matches.
A Regex.ValueMatchEnumerator to iterate over the matches.
Searches an input span for all occurrences of a regular expression and returns a Regex.ValueMatchEnumerator to iterate over the matches.
A Regex.ValueMatchEnumerator to iterate over the matches.
Searches an input span for all occurrences of a regular expression and returns a Regex.ValueMatchEnumerator to iterate over the matches.
A Regex.ValueMatchEnumerator to iterate over the matches.
Concatenates an array of strings, using the specified separator between each member.
Concatenates the string representations of an array of objects, using the specified separator between each member.
Concatenates the string representations of a span of objects, using the specified separator between each member.
Concatenates a span of strings, using the specified separator between each member.
Concatenates the string representations of a span of objects, using the specified separator between each member.
Concatenates a span of strings, using the specified separator between each member.
Concatenates the specified elements of a string array, using the specified separator between each element.
Concatenates the specified elements of a string array, using the specified separator between each element.
A collection of helper classes to test various conditions within
unit tests. If the condition being tested is not met, an exception
is thrown.
A collection of helper classes to test various conditions within
unit tests. If the condition being tested is not met, an exception
is thrown.
A collection of helper classes to test various conditions within
unit tests. If the condition being tested is not met, an exception
is thrown.
A collection of helper classes to test various conditions within
unit tests. If the condition being tested is not met, an exception
is thrown.
A collection of helper classes to test various conditions within
unit tests. If the condition being tested is not met, an exception
is thrown.
A collection of helper classes to test various conditions within
unit tests. If the condition being tested is not met, an exception
is thrown.
A collection of helper classes to test various conditions within
unit tests. If the condition being tested is not met, an exception
is thrown.
A collection of helper classes to test various conditions within
unit tests. If the condition being tested is not met, an exception
is thrown.
A collection of helper classes to test various conditions within
unit tests. If the condition being tested is not met, an exception
is thrown.
A collection of helper classes to test various conditions within
unit tests. If the condition being tested is not met, an exception
is thrown.
A collection of helper classes to test various conditions within
unit tests. If the condition being tested is not met, an exception
is thrown.
Tests whether the specified values are equal and throws an exception
if the two values are not equal.
The equality is computed using the default .
The type of values to compare.
The first value to compare. This is the value the tests expects.
The second value to compare. This is the value produced by the code under test.
Thrown if is not equal to .
Tests whether the specified values are equal and throws an exception
if the two values are not equal.
The equality is computed using the default .
The type of values to compare.
The first value to compare. This is the value the tests expects.
The second value to compare. This is the value produced by the code under test.
The implementation to use when comparing keys,
or null to use the default .
Thrown if is not equal to .
Tests whether the specified values are equal and throws an exception
if the two values are not equal.
The equality is computed using the default .
The type of values to compare.
The first value to compare. This is the value the tests expects.
The second value to compare. This is the value produced by the code under test.
The message to include in the exception when
is not equal to . The message is shown in
test results.
Thrown if is not equal to
.
Tests whether the specified values are equal and throws an exception
if the two values are not equal.
The equality is computed using the provided parameter.
The type of values to compare.
The first value to compare. This is the value the tests expects.
The second value to compare. This is the value produced by the code under test.
The implementation to use when comparing keys,
or null to use the default .
The message to include in the exception when
is not equal to . The message is shown in
test results.
Thrown if is not equal to
.
Tests whether the specified values are equal and throws an exception
if the two values are not equal.
The equality is computed using the default .
The type of values to compare.
The first value to compare. This is the value the tests expects.
The second value to compare. This is the value produced by the code under test.
The message to include in the exception when
is not equal to . The message is shown in
test results.
An array of parameters to use when formatting .
Thrown if is not equal to
.
Tests whether the specified values are equal and throws an exception
if the two values are not equal.
The equality is computed using the provided parameter.
The type of values to compare.
The first value to compare. This is the value the tests expects.
The second value to compare. This is the value produced by the code under test.
The implementation to use when comparing keys,
or null to use the default .
The message to include in the exception when
is not equal to . The message is shown in
test results.
An array of parameters to use when formatting .
Thrown if is not equal to
.
Tests whether the specified values are equal and throws an exception
if the two values are not equal.
The equality is computed using the default .
The type of values to compare.
The first value to compare. This is the value the tests expects.
The second value to compare. This is the value produced by the code under test.
Thrown if is not equal to .
Tests whether the specified values are equal and throws an exception
if the two values are not equal.
The equality is computed using the default .
The type of values to compare.
The first value to compare. This is the value the tests expects.
The second value to compare. This is the value produced by the code under test.
The message to include in the exception when
is not equal to . The message is shown in
test results.
Thrown if is not equal to
.
Tests whether the specified values are equal and throws an exception
if the two values are not equal.
The equality is computed using the default .
The type of values to compare.
The first value to compare. This is the value the tests expects.
The second value to compare. This is the value produced by the code under test.
The message to include in the exception when
is not equal to . The message is shown in
test results.
An array of parameters to use when formatting .
Thrown if is not equal to
.
Tests whether the specified values are unequal and throws an exception
if the two values are equal.
The equality is computed using the default .
The type of values to compare.
The first value to compare. This is the value the test expects not
to match .
The second value to compare. This is the value produced by the code under test.
Thrown if is equal to .
Tests whether the specified values are unequal and throws an exception
if the two values are equal.
The equality is computed using the provided parameter.
The type of values to compare.
The first value to compare. This is the value the test expects not
to match .
The second value to compare. This is the value produced by the code under test.
The implementation to use when comparing keys,
or null to use the default .
Thrown if is equal to .
Tests whether the specified values are unequal and throws an exception
if the two values are equal.
The equality is computed using the default .
The type of values to compare.
The first value to compare. This is the value the test expects not
to match .
The second value to compare. This is the value produced by the code under test.
The message to include in the exception when
is equal to . The message is shown in
test results.
Thrown if is equal to .
Tests whether the specified values are unequal and throws an exception
if the two values are equal.
The equality is computed using the provided parameter.
The type of values to compare.
The first value to compare. This is the value the test expects not
to match .
The second value to compare. This is the value produced by the code under test.
The implementation to use when comparing keys,
or null to use the default .
The message to include in the exception when
is equal to . The message is shown in
test results.
Thrown if is equal to .
Tests whether the specified values are unequal and throws an exception
if the two values are equal.
The equality is computed using the default .
The type of values to compare.
The first value to compare. This is the value the test expects not
to match .
The second value to compare. This is the value produced by the code under test.
The message to include in the exception when
is equal to . The message is shown in
test results.
An array of parameters to use when formatting .
Thrown if is equal to .
Tests whether the specified values are unequal and throws an exception
if the two values are equal.
The equality is computed using the provided parameter.
The type of values to compare.
The first value to compare. This is the value the test expects not
to match .
The second value to compare. This is the value produced by the code under test.
The implementation to use when comparing keys,
or null to use the default .
The message to include in the exception when
is equal to . The message is shown in
test results.
An array of parameters to use when formatting .
Thrown if is equal to .
Tests whether the specified floats are equal and throws an exception
if they are not equal.
The first float to compare. This is the float the tests expects.
The second float to compare. This is the float produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by more than .
Thrown if is not equal to
.
Tests whether the specified floats are equal and throws an exception
if they are not equal.
The first float to compare. This is the float the tests expects.
The second float to compare. This is the float produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by more than .
The message to include in the exception when
is different than by more than
. The message is shown in test results.
Thrown if is not equal to
.
Tests whether the specified floats are equal and throws an exception
if they are not equal.
The first float to compare. This is the float the tests expects.
The second float to compare. This is the float produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by more than .
The message to include in the exception when
is different than by more than
. The message is shown in test results.
An array of parameters to use when formatting .
Thrown if is not equal to
.
Tests whether the specified floats are unequal and throws an exception
if they are equal.
The first float to compare. This is the float the test expects not to
match .
The second float to compare. This is the float produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by at most .
Thrown if is equal to .
Tests whether the specified floats are unequal and throws an exception
if they are equal.
The first float to compare. This is the float the test expects not to
match .
The second float to compare. This is the float produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by at most .
The message to include in the exception when
is equal to or different by less than
. The message is shown in test results.
Thrown if is equal to .
Tests whether the specified floats are unequal and throws an exception
if they are equal.
The first float to compare. This is the float the test expects not to
match .
The second float to compare. This is the float produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by at most .
The message to include in the exception when
is equal to or different by less than
. The message is shown in test results.
An array of parameters to use when formatting .
Thrown if is equal to .
Tests whether the specified decimals are equal and throws an exception
if they are not equal.
The first decimal to compare. This is the decimal the tests expects.
The second decimal to compare. This is the decimal produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by more than .
Thrown if is not equal to
.
Tests whether the specified decimals are equal and throws an exception
if they are not equal.
The first decimal to compare. This is the decimal the tests expects.
The second decimal to compare. This is the decimal produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by more than .
The message to include in the exception when
is different than by more than
. The message is shown in test results.
Thrown if is not equal to
.
Tests whether the specified decimals are equal and throws an exception
if they are not equal.
The first decimal to compare. This is the decimal the tests expects.
The second decimal to compare. This is the decimal produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by more than .
The message to include in the exception when
is different than by more than
. The message is shown in test results.
An array of parameters to use when formatting .
Thrown if is not equal to
.
Tests whether the specified decimals are unequal and throws an exception
if they are equal.
The first decimal to compare. This is the decimal the test expects not to
match .
The second decimal to compare. This is the decimal produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by at most .
Thrown if is equal to .
Tests whether the specified decimals are unequal and throws an exception
if they are equal.
The first decimal to compare. This is the decimal the test expects not to
match .
The second decimal to compare. This is the decimal produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by at most .
The message to include in the exception when
is equal to or different by less than
. The message is shown in test results.
Thrown if is equal to .
Tests whether the specified decimals are unequal and throws an exception
if they are equal.
The first decimal to compare. This is the decimal the test expects not to
match .
The second decimal to compare. This is the decimal produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by at most .
The message to include in the exception when
is equal to or different by less than
. The message is shown in test results.
An array of parameters to use when formatting .
Thrown if is equal to .
Tests whether the specified longs are equal and throws an exception
if they are not equal.
The first long to compare. This is the long the tests expects.
The second long to compare. This is the long produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by more than .
Thrown if is not equal to
.
Tests whether the specified longs are equal and throws an exception
if they are not equal.
The first long to compare. This is the long the tests expects.
The second long to compare. This is the long produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by more than .
The message to include in the exception when
is different than by more than
. The message is shown in test results.
Thrown if is not equal to
.
Tests whether the specified longs are equal and throws an exception
if they are not equal.
The first long to compare. This is the long the tests expects.
The second long to compare. This is the long produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by more than .
The message to include in the exception when
is different than by more than
. The message is shown in test results.
An array of parameters to use when formatting .
Thrown if is not equal to
.
Tests whether the specified longs are unequal and throws an exception
if they are equal.
The first long to compare. This is the long the test expects not to
match .
The second long to compare. This is the long produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by at most .
Thrown if is equal to .
Tests whether the specified longs are unequal and throws an exception
if they are equal.
The first long to compare. This is the long the test expects not to
match .
The second long to compare. This is the long produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by at most .
The message to include in the exception when
is equal to or different by less than
. The message is shown in test results.
Thrown if is equal to .
Tests whether the specified longs are unequal and throws an exception
if they are equal.
The first long to compare. This is the long the test expects not to
match .
The second long to compare. This is the long produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by at most .
The message to include in the exception when
is equal to or different by less than
. The message is shown in test results.
An array of parameters to use when formatting .
Thrown if is equal to .
Tests whether the specified doubles are equal and throws an exception
if they are not equal.
The first double to compare. This is the double the tests expects.
The second double to compare. This is the double produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by more than .
Thrown if is not equal to
.
Tests whether the specified doubles are equal and throws an exception
if they are not equal.
The first double to compare. This is the double the tests expects.
The second double to compare. This is the double produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by more than .
The message to include in the exception when
is different than by more than
. The message is shown in test results.
Thrown if is not equal to .
Tests whether the specified doubles are equal and throws an exception
if they are not equal.
The first double to compare. This is the double the tests expects.
The second double to compare. This is the double produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by more than .
The message to include in the exception when
is different than by more than
. The message is shown in test results.
An array of parameters to use when formatting .
Thrown if is not equal to .
Tests whether the specified doubles are unequal and throws an exception
if they are equal.
The first double to compare. This is the double the test expects not to
match .
The second double to compare. This is the double produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by at most .
Thrown if is equal to .
Tests whether the specified doubles are unequal and throws an exception
if they are equal.
The first double to compare. This is the double the test expects not to
match .
The second double to compare. This is the double produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by at most .
The message to include in the exception when
is equal to or different by less than
. The message is shown in test results.
Thrown if is equal to .
Tests whether the specified doubles are unequal and throws an exception
if they are equal.
The first double to compare. This is the double the test expects not to
match .
The second double to compare. This is the double produced by the code under test.
The required accuracy. An exception will be thrown only if
is different than
by at most .
The message to include in the exception when
is equal to or different by less than
. The message is shown in test results.
An array of parameters to use when formatting .
Thrown if is equal to .
Tests whether the specified strings are equal and throws an exception
if they are not equal. The invariant culture is used for the comparison.
The first string to compare. This is the string the tests expects.
The second string to compare. This is the string produced by the code under test.
A Boolean indicating a case-sensitive or insensitive comparison. (true
indicates a case-insensitive comparison.)
Thrown if is not equal to .
Tests whether the specified strings are equal and throws an exception
if they are not equal. The invariant culture is used for the comparison.
The first string to compare. This is the string the tests expects.
The second string to compare. This is the string produced by the code under test.
A Boolean indicating a case-sensitive or insensitive comparison. (true
indicates a case-insensitive comparison.)
The message to include in the exception when
is not equal to . The message is shown in
test results.
Thrown if is not equal to .
Tests whether the specified strings are equal and throws an exception
if they are not equal. The invariant culture is used for the comparison.
The first string to compare. This is the string the tests expects.
The second string to compare. This is the string produced by the code under test.
A Boolean indicating a case-sensitive or insensitive comparison. (true
indicates a case-insensitive comparison.)
The message to include in the exception when
is not equal to . The message is shown in
test results.
An array of parameters to use when formatting .
Thrown if is not equal to .
Tests whether the specified strings are equal and throws an exception
if they are not equal.
The first string to compare. This is the string the tests expects.
The second string to compare. This is the string produced by the code under test.
A Boolean indicating a case-sensitive or insensitive comparison. (true
indicates a case-insensitive comparison.)
A CultureInfo object that supplies culture-specific comparison information. If culture is null, the current culture is used.
Thrown if is not equal to .
Tests whether the specified strings are equal and throws an exception
if they are not equal.
The first string to compare. This is the string the tests expects.
The second string to compare. This is the string produced by the code under test.
A Boolean indicating a case-sensitive or insensitive comparison. (true
indicates a case-insensitive comparison.)
A CultureInfo object that supplies culture-specific comparison information. If culture is null, the current culture is used.
The message to include in the exception when
is not equal to . The message is shown in
test results.
Thrown if is not equal to .
Tests whether the specified strings are equal and throws an exception
if they are not equal.
The first string to compare. This is the string the tests expects.
The second string to compare. This is the string produced by the code under test.
A Boolean indicating a case-sensitive or insensitive comparison. (true
indicates a case-insensitive comparison.)
A CultureInfo object that supplies culture-specific comparison information. If culture is null, the current culture is used.
The message to include in the exception when
is not equal to . The message is shown in
test results.
An array of parameters to use when formatting .
Thrown if is not equal to .
Tests whether the specified strings are unequal and throws an exception
if they are equal. The invariant culture is used for the comparison.
The first string to compare. This is the string the test expects not to
match .
The second string to compare. This is the string produced by the code under test.
A Boolean indicating a case-sensitive or insensitive comparison. (true
indicates a case-insensitive comparison.)
Thrown if is equal to .
Tests whether the specified strings are unequal and throws an exception
if they are equal. The invariant culture is used for the comparison.
The first string to compare. This is the string the test expects not to
match .
The second string to compare. This is the string produced by the code under test.
A Boolean indicating a case-sensitive or insensitive comparison. (true
indicates a case-insensitive comparison.)
The message to include in the exception when
is equal to . The message is shown in
test results.
Thrown if is equal to .
Tests whether the specified strings are unequal and throws an exception
if they are equal. The invariant culture is used for the comparison.
The first string to compare. This is the string the test expects not to
match .
The second string to compare. This is the string produced by the code under test.
A Boolean indicating a case-sensitive or insensitive comparison. (true
indicates a case-insensitive comparison.)
The message to include in the exception when
is equal to . The message is shown in
test results.
An array of parameters to use when formatting .
Thrown if is equal to .
Tests whether the specified strings are unequal and throws an exception
if they are equal.
The first string to compare. This is the string the test expects not to
match .
The second string to compare. This is the string produced by the code under test.
A Boolean indicating a case-sensitive or insensitive comparison. (true
indicates a case-insensitive comparison.)
A CultureInfo object that supplies culture-specific comparison information. If culture is null, the current culture is used.
Thrown if is equal to .
Tests whether the specified strings are unequal and throws an exception
if they are equal.
The first string to compare. This is the string the test expects not to
match .
The second string to compare. This is the string produced by the code under test.
A Boolean indicating a case-sensitive or insensitive comparison. (true
indicates a case-insensitive comparison.)
A CultureInfo object that supplies culture-specific comparison information. If culture is null, the current culture is used.
The message to include in the exception when
is equal to . The message is shown in
test results.
Thrown if is equal to .
Tests whether the specified strings are unequal and throws an exception
if they are equal.
The first string to compare. This is the string the test expects not to
match .
The second string to compare. This is the string produced by the code under test.
A Boolean indicating a case-sensitive or insensitive comparison. (true
indicates a case-insensitive comparison.)
A CultureInfo object that supplies culture-specific comparison information. If culture is null, the current culture is used.
The message to include in the exception when
is equal to . The message is shown in
test results.
An array of parameters to use when formatting .
Thrown if is equal to .
Tests whether the specified objects both refer to the same object and
throws an exception if the two inputs do not refer to the same object.
The type of values to compare.
The first object to compare. This is the value the test expects.
The second object to compare. This is the value produced by the code under test.
Thrown if does not refer to the same object
as .
Tests whether the specified objects both refer to the same object and
throws an exception if the two inputs do not refer to the same object.
The type of values to compare.
The first object to compare. This is the value the test expects.
The second object to compare. This is the value produced by the code under test.
The message to include in the exception when
is not the same as . The message is shown
in test results.
Thrown if does not refer to the same object
as .
Tests whether the specified objects both refer to the same object and
throws an exception if the two inputs do not refer to the same object.
The type of values to compare.
The first object to compare. This is the value the test expects.
The second object to compare. This is the value produced by the code under test.
The message to include in the exception when
is not the same as . The message is shown
in test results.
An array of parameters to use when formatting .
Thrown if does not refer to the same object
as .
Tests whether the specified objects refer to different objects and
throws an exception if the two inputs refer to the same object.
The type of values to compare.
The first object to compare. This is the value the test expects not
to match .
The second object to compare. This is the value produced by the code under test.
Thrown if refers to the same object
as .
Tests whether the specified objects refer to different objects and
throws an exception if the two inputs refer to the same object.
The type of values to compare.
The first object to compare. This is the value the test expects not
to match .
The second object to compare. This is the value produced by the code under test.
The message to include in the exception when
is the same as . The message is shown in
test results.
Thrown if refers to the same object
as .
Tests whether the specified objects refer to different objects and
throws an exception if the two inputs refer to the same object.
The type of values to compare.
The first object to compare. This is the value the test expects not
to match .
The second object to compare. This is the value produced by the code under test.
The message to include in the exception when
is the same as . The message is shown in
test results.
An array of parameters to use when formatting .
Thrown if refers to the same object
as .
Tests whether the specified collection contains exactly one element.
The type of the collection items.
The collection.
The item.
Tests whether the specified collection contains exactly one element.
The type of the collection items.
The collection.
The message to display when the assertion fails.
The item.
Tests whether the specified collection contains exactly one element.
The type of the collection items.
The collection.
The message to display when the assertion fails.
The item.
Tests whether the specified collection contains exactly one element.
The type of the collection items.
The collection.
The message format to display when the assertion fails.
The parameters to format the message.
The item.
Tests whether the specified collection contains the given element.
The type of the collection items.
The expected item.
The collection.
Tests whether the specified collection contains the given element.
The type of the collection items.
The expected item.
The collection.
The message to display when the assertion fails.
Tests whether the specified collection contains the given element.
The type of the collection items.
The expected item.
The collection.
The message format to display when the assertion fails.
The parameters to format the message.
Tests whether the specified collection contains the given element.
The type of the collection items.
The expected item.
The collection.
An equality comparer to compare values.
Tests whether the specified collection contains the given element.
The type of the collection items.
The expected item.
The collection.
An equality comparer to compare values.
The message to display when the assertion fails.
Tests whether the specified collection contains the given element.
The type of the collection items.
The expected item.
The collection.
An equality comparer to compare values.
The message to display when the assertion fails.
The parameters to format the message.
Tests whether the specified collection contains the given element.
The type of the collection items.
A function to test each element for a condition.
The collection.
Tests whether the specified collection contains the given element.
The type of the collection items.
The collection.
A function to test each element for a condition.
The message to display when the assertion fails.
Tests whether the specified collection contains the given element.
The type of the collection items.
A function to test each element for a condition.
The collection.
The message format to display when the assertion fails.
The parameters to format the message.
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string expected to occur within .
The string that is expected to contain .
is null, or is null,
or does not contain .
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string expected to occur within .
The string that is expected to contain .
The message to include in the exception when
is not in . The message is shown in
test results.
is null, or is null,
or does not contain .
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string expected to occur within .
The string that is expected to contain .
The message to include in the exception when
is not in . The message is shown in
test results.
An array of parameters to use when formatting .
is null, or is null,
or does not contain .
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string expected to occur within .
The string that is expected to contain .
The comparison method to compare strings .
is null, or is null,
or does not contain .
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string expected to occur within .
The string that is expected to contain .
The comparison method to compare strings .
The message to include in the exception when
is not in . The message is shown in
test results.
is null, or is null,
or does not contain .
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string expected to occur within .
The string that is expected to contain .
The comparison method to compare strings .
The message to include in the exception when
is not in . The message is shown in
test results.
An array of parameters to use when formatting .
is null, or is null,
or does not contain .
Tests whether the specified collection does not contain the specified item.
The type of the collection items.
The expected item.
The collection.
Tests whether the specified collection does not contain the specified item.
The type of the collection items.
The expected item.
The collection.
The message to display when the assertion fails.
Tests whether the specified collection does not contain the specified item.
The type of the collection items.
The expected item.
The collection.
The message to display when the assertion fails.
The parameters to format the message.
Tests whether the specified collection does not contain the specified item.
The type of the collection items.
The expected item.
The collection.
An equality comparer to compare values.
Tests whether the specified collection does not contain the specified item.
The type of the collection items.
The expected item.
The collection.
An equality comparer to compare values.
The message to display when the assertion fails.
Tests whether the specified collection does not contain the specified item.
The type of the collection items.
The expected item.
The collection.
An equality comparer to compare values.
The message to display when the assertion fails.
The parameters to format the message.
Tests whether the specified collection does not contain the specified item.
The type of the collection items.
A function to test each element for a condition.
The collection.
Tests whether the specified collection does not contain the specified item.
The type of the collection items.
A function to test each element for a condition.
The collection.
The message to display when the assertion fails.
Tests whether the specified collection does not contain the specified item.
The type of the collection items.
A function to test each element for a condition.
The collection.
The message to display when the assertion fails.
The parameters to format the message.
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string expected to occur within .
The string that is expected to contain .
is null, or is null,
or does not contain .
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string expected to occur within .
The string that is expected to contain .
The message to include in the exception when
is not in . The message is shown in
test results.
is null, or is null,
or does not contain .
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string expected to occur within .
The string that is expected to contain .
The message to include in the exception when
is not in . The message is shown in
test results.
An array of parameters to use when formatting .
is null, or is null,
or does not contain .
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string expected to occur within .
The string that is expected to contain .
The comparison method to compare strings .
is null, or is null,
or does not contain .
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string expected to occur within .
The string that is expected to contain .
The comparison method to compare strings .
The message to include in the exception when
is not in . The message is shown in
test results.
is null, or is null,
or does not contain .
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string expected to occur within .
The string that is expected to contain .
The comparison method to compare strings .
The message to include in the exception when
is not in . The message is shown in
test results.
An array of parameters to use when formatting .
is null, or is null,
or does not contain .
Tests that the collection is not empty.
The type of the items of the collection.
The collection.
Tests whether the collection is not empty.
The type of the collection items.
The collection.
The message to display when the assertion fails.
Tests that the collection is not empty.
The type of the collection items.
The collection.
The message to display when the assertion fails.
Tests that the collection is not empty.
The type of the collection items.
The collection.
The message format to display when the assertion fails.
The parameters to format the message.
Tests whether the collection has the expected count/length.
The type of the collection items.
The expected count.
The collection.
Tests whether the collection has the expected count/length.
The type of the collection items.
The expected count.
The collection.
The message to display when the assertion fails.
Tests whether the collection has the expected count/length.
The type of the collection items.
The expected count.
The collection.
The message to display when the assertion fails.
Tests whether the collection has the expected count/length.
The type of the collection items.
The expected count.
The collection.
The message format to display when the assertion fails.
The parameters to format the message.
Tests that the collection is empty.
The type of the collection items.
The collection.
Tests that the collection is empty.
The type of the collection items.
The collection.
The message to display when the assertion fails.
Tests that the collection is empty.
The type of the collection items.
The collection.
The message to display when the assertion fails.
Tests that the collection is empty.
The type of the collection items.
The collection.
The message format to display when the assertion fails.
The parameters to format the message.
Gets the singleton instance of the Assert functionality.
Users can use this to plug-in custom assertions through C# extension methods.
For instance, the signature of a custom assertion provider could be "public static void IsOfType<T>(this Assert assert, object obj)"
Users could then use a syntax similar to the default assertions which in this case is "Assert.That.IsOfType<Dog>(animal);"
More documentation is at "https://github.com/Microsoft/testfx/docs/README.md".
Replaces null characters ('\0') with "\\0".
The string to search.
The converted string with null characters replaced by "\\0".
This is only public and still present to preserve compatibility with the V1 framework.
Helper function that creates and throws an AssertionFailedException.
name of the assertion throwing an exception.
The assertion failure message.
Builds the formatted message using the given user format message and parameters.
A composite format string.
An object array that contains zero or more objects to format.
The formatted string based on format and parameters.
Checks the parameter for valid conditions.
The parameter.
The assertion Name.
parameter name.
message for the invalid parameter exception.
The parameters.
Safely converts an object to a string, handling null values and null characters.
Null values are converted to "(null)". Null characters are converted to "\\0".
The object to convert to a string.
The converted string.
Static equals overloads are used for comparing instances of two types for reference
equality. This method should not be used for comparison of two instances for
equality. This object will always throw with Assert.Fail. Please use
Assert.AreEqual and associated overloads in your unit tests.
Object A.
Object B.
False, always.
Throws an AssertFailedException.
Always thrown.
Throws an AssertFailedException.
The message to include in the exception. The message is shown in
test results.
Always thrown.
Throws an AssertFailedException.
The message to include in the exception. The message is shown in
test results.
An array of parameters to use when formatting .
Always thrown.
Throws an AssertInconclusiveException.
Always thrown.
Throws an AssertInconclusiveException.
The message to include in the exception. The message is shown in
test results.
Always thrown.
Throws an AssertInconclusiveException.
The message to include in the exception. The message is shown in
test results.
An array of parameters to use when formatting .
Always thrown.
Tests whether the specified object is an instance of the expected
type and throws an exception if the expected type is not in the
inheritance hierarchy of the object.
The object the test expects to be of the specified type.
The expected type of .
Thrown if is null or
is not in the inheritance hierarchy
of .
Tests whether the specified object is an instance of the generic
type and throws an exception if the generic type is not in the
inheritance hierarchy of the object.
The expected type of .
Tests whether the specified object is an instance of the generic
type and throws an exception if the generic type is not in the
inheritance hierarchy of the object.
The expected type of .
Tests whether the specified object is an instance of the expected
type and throws an exception if the expected type is not in the
inheritance hierarchy of the object.
The object the test expects to be of the specified type.
The expected type of .
The message to include in the exception when
is not an instance of . The message is
shown in test results.
Thrown if is null or
is not in the inheritance hierarchy
of .
Tests whether the specified object is an instance of the generic
type and throws an exception if the generic type is not in the
inheritance hierarchy of the object.
The expected type of .
Tests whether the specified object is an instance of the generic
type and throws an exception if the generic type is not in the
inheritance hierarchy of the object.
The expected type of .
Tests whether the specified object is an instance of the expected
type and throws an exception if the expected type is not in the
inheritance hierarchy of the object.
The object the test expects to be of the specified type.
The expected type of .
The message to include in the exception when
is not an instance of . The message is
shown in test results.
An array of parameters to use when formatting .
Thrown if is null or
is not in the inheritance hierarchy
of .
Tests whether the specified object is an instance of the generic
type and throws an exception if the generic type is not in the
inheritance hierarchy of the object.
The expected type of .
Tests whether the specified object is an instance of the generic
type and throws an exception if the generic type is not in the
inheritance hierarchy of the object.
The expected type of .
Tests whether the specified object is not an instance of the wrong
type and throws an exception if the specified type is in the
inheritance hierarchy of the object.
The object the test expects not to be of the specified type.
The type that should not be.
Thrown if is not null and
is in the inheritance hierarchy
of .
Tests whether the specified object is not an instance of the wrong generic
type and throws an exception if the specified type is in the
inheritance hierarchy of the object.
The type that should not be.
Tests whether the specified object is not an instance of the wrong
type and throws an exception if the specified type is in the
inheritance hierarchy of the object.
The object the test expects not to be of the specified type.
The type that should not be.
The message to include in the exception when
is an instance of . The message is shown
in test results.
Thrown if is not null and
is in the inheritance hierarchy
of .
Tests whether the specified object is not an instance of the wrong generic
type and throws an exception if the specified type is in the
inheritance hierarchy of the object.
The type that should not be.
Tests whether the specified object is not an instance of the wrong
type and throws an exception if the specified type is in the
inheritance hierarchy of the object.
The object the test expects not to be of the specified type.
The type that should not be.
The message to include in the exception when
is an instance of . The message is shown
in test results.
An array of parameters to use when formatting .
Thrown if is not null and
is in the inheritance hierarchy
of .
Tests whether the specified object is not an instance of the wrong generic
type and throws an exception if the specified type is in the
inheritance hierarchy of the object.
The type that should not be.
Tests whether the specified object is null and throws an exception
if it is not.
The object the test expects to be null.
Thrown if is not null.
Tests whether the specified object is null and throws an exception
if it is not.
The object the test expects to be null.
The message to include in the exception when
is not null. The message is shown in test results.
Thrown if is not null.
Tests whether the specified object is null and throws an exception
if it is not.
The object the test expects to be null.
The message to include in the exception when
is not null. The message is shown in test results.
An array of parameters to use when formatting .
Thrown if is not null.
Tests whether the specified object is non-null and throws an exception
if it is null.
The object the test expects not to be null.
Thrown if is null.
Tests whether the specified object is non-null and throws an exception
if it is null.
The object the test expects not to be null.
The message to include in the exception when
is null. The message is shown in test results.
Thrown if is null.
Tests whether the specified object is non-null and throws an exception
if it is null.
The object the test expects not to be null.
The message to include in the exception when
is null. The message is shown in test results.
An array of parameters to use when formatting .
Thrown if is null.
Tests whether the specified condition is true and throws an exception
if the condition is false.
The condition the test expects to be true.
Thrown if is false.
Tests whether the specified condition is true and throws an exception
if the condition is false.
The condition the test expects to be true.
Thrown if is false.
Tests whether the specified condition is true and throws an exception
if the condition is false.
The condition the test expects to be true.
The message to include in the exception when
is false. The message is shown in test results.
Thrown if is false.
Tests whether the specified condition is true and throws an exception
if the condition is false.
The condition the test expects to be true.
The message to include in the exception when
is false. The message is shown in test results.
Thrown if is false.
Tests whether the specified condition is true and throws an exception
if the condition is false.
The condition the test expects to be true.
The message to include in the exception when
is false. The message is shown in test results.
An array of parameters to use when formatting .
Thrown if is false.
Tests whether the specified condition is true and throws an exception
if the condition is false.
The condition the test expects to be true.
The message to include in the exception when
is false. The message is shown in test results.
An array of parameters to use when formatting .
Thrown if is false.
Tests whether the specified condition is false and throws an exception
if the condition is true.
The condition the test expects to be false.
Thrown if is true.
Tests whether the specified condition is false and throws an exception
if the condition is true.
The condition the test expects to be false.
Thrown if is true.
Tests whether the specified condition is false and throws an exception
if the condition is true.
The condition the test expects to be false.
The message to include in the exception when
is true. The message is shown in test results.
Thrown if is true.
Tests whether the specified condition is false and throws an exception
if the condition is true.
The condition the test expects to be false.
The message to include in the exception when
is true. The message is shown in test results.
Thrown if is true.
Tests whether the specified condition is false and throws an exception
if the condition is true.
The condition the test expects to be false.
The message to include in the exception when
is true. The message is shown in test results.
An array of parameters to use when formatting .
Thrown if is true.
Tests whether the specified condition is false and throws an exception
if the condition is true.
The condition the test expects to be false.
The message to include in the exception when
is true. The message is shown in test results.
An array of parameters to use when formatting .
Thrown if is true.
Asserts that the delegate throws an exception of type
(or derived type) and throws AssertFailedException if code does not throws exception or throws
exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
The message to include in the exception when does not throws exception of type .
An array of parameters to use when formatting .
The type of exception expected to be thrown.
Thrown if does not throws exception of type .
The exception that was thrown.
Asserts that the delegate throws an exception of type
(or derived type) and throws AssertFailedException if code does not throws exception or throws
exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
A func that takes the thrown Exception (or null if the action didn't throw any exception) to construct the message to include in the exception when does not throws exception of type .
The type of exception expected to be thrown.
Thrown if does not throws exception of type .
The exception that was thrown.
Asserts that the delegate throws an exception of type
(and not of derived type) and throws AssertFailedException if code does not throws exception or throws
exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
The message to include in the exception when does not throws exception of type .
An array of parameters to use when formatting .
The type of exception expected to be thrown.
Thrown if does not throws exception of type .
The exception that was thrown.
Asserts that the delegate throws an exception of type
(and not of derived type) and throws AssertFailedException if code does not throws exception or throws
exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
A func that takes the thrown Exception (or null if the action didn't throw any exception) to construct the message to include in the exception when does not throws exception of type .
The type of exception expected to be thrown.
Thrown if does not throws exception of type .
The exception that was thrown.
Tests whether the code specified by delegate throws exact given exception
of type (and not of derived type) and throws AssertFailedException
if code does not throws exception or throws exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
The exact type of exception expected to be thrown.
Thrown if does not throws exception of type .
The exception that was thrown.
Tests whether the code specified by delegate throws exact given exception
of type (and not of derived type) and throws AssertFailedException
if code does not throws exception or throws exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
The message to include in the exception when
does not throws exception of type .
Type of exception expected to be thrown.
Thrown if does not throws exception of type .
The exception that was thrown.
Tests whether the code specified by delegate throws exact given exception
of type (and not of derived type) and throws AssertFailedException
if code does not throws exception or throws exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
Type of exception expected to be thrown.
Thrown if does not throws exception of type .
The exception that was thrown.
Tests whether the code specified by delegate throws exact given exception
of type (and not of derived type) and throws AssertFailedException
if code does not throws exception or throws exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
The message to include in the exception when
does not throws exception of type .
Type of exception expected to be thrown.
Thrown if does not throws exception of type .
The exception that was thrown.
Tests whether the code specified by delegate throws exact given exception
of type (and not of derived type) and throws AssertFailedException
if code does not throws exception or throws exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
The message to include in the exception when
does not throws exception of type .
An array of parameters to use when formatting .
Type of exception expected to be thrown.
Thrown if does not throw exception of type .
The exception that was thrown.
Tests whether the code specified by delegate throws exact given exception
of type (and not of derived type) and throws AssertFailedException
if code does not throws exception or throws exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
The message to include in the exception when
does not throws exception of type .
An array of parameters to use when formatting .
Type of exception expected to be thrown.
Thrown if does not throws exception of type .
The exception that was thrown.
Asserts that the delegate throws an exception of type
(or derived type) and throws AssertFailedException if code does not throws exception or throws
exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
The message to include in the exception when does not throws exception of type .
An array of parameters to use when formatting .
The type of exception expected to be thrown.
Thrown if does not throws exception of type .
The exception that was thrown.
Asserts that the delegate throws an exception of type
(and not of derived type) and throws AssertFailedException if code does not throws exception or throws
exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
The message to include in the exception when does not throws exception of type .
An array of parameters to use when formatting .
The type of exception expected to be thrown.
Thrown if does not throws exception of type .
The exception that was thrown.
Asserts that the delegate throws an exception of type
(or derived type) and throws AssertFailedException if code does not throws exception or throws
exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
A func that takes the thrown Exception (or null if the action didn't throw any exception) to construct the message to include in the exception when does not throws exception of type .
The type of exception expected to be thrown.
Thrown if does not throws exception of type .
The exception that was thrown.
Asserts that the delegate throws an exception of type
(and not of derived type) and throws AssertFailedException if code does not throws exception or throws
exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
A func that takes the thrown Exception (or null if the action didn't throw any exception) to construct the message to include in the exception when does not throws exception of type .
The type of exception expected to be thrown.
Thrown if does not throws exception of type .
The exception that was thrown.
Tests whether the code specified by delegate throws exact given exception
of type (and not of derived type) and throws AssertFailedException
if code does not throws exception or throws exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
Type of exception expected to be thrown.
Thrown if does not throws exception of type .
The executing the delegate.
Tests whether the code specified by delegate throws exact given exception
of type (and not of derived type) and throws AssertFailedException
if code does not throws exception or throws exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
The message to include in the exception when
does not throws exception of type .
Type of exception expected to be thrown.
Thrown if does not throws exception of type .
The executing the delegate.
Tests whether the code specified by delegate throws exact given exception
of type (and not of derived type) and throws AssertFailedException
if code does not throws exception or throws exception of type other than .
Delegate to code to be tested and which is expected to throw exception.
The message to include in the exception when
does not throws exception of type .
An array of parameters to use when formatting .
Type of exception expected to be thrown.
Thrown if does not throws exception of type .
The executing the delegate.
A collection of helper classes to test various conditions associated
with collections within unit tests. If the condition being tested is not
met, an exception is thrown.
Gets the singleton instance of the CollectionAssert functionality.
Users can use this to plug-in custom assertions through C# extension methods.
For instance, the signature of a custom assertion provider could be "public static void AreEqualUnordered(this CollectionAssert customAssert, ICollection expected, ICollection actual)"
Users could then use a syntax similar to the default assertions which in this case is "CollectionAssert.That.AreEqualUnordered(list1, list2);"
More documentation is at "https://github.com/Microsoft/testfx/docs/README.md".
Tests whether the specified collection contains the specified element
and throws an exception if the element is not in the collection.
The collection in which to search for the element.
The element that is expected to be in the collection.
is null, or does not contain
element .
Tests whether the specified collection contains the specified element
and throws an exception if the element is not in the collection.
The collection in which to search for the element.
The element that is expected to be in the collection.
The message to include in the exception when
is not in . The message is shown in
test results.
is null, or does not contain
element .
Tests whether the specified collection contains the specified element
and throws an exception if the element is not in the collection.
The collection in which to search for the element.
The element that is expected to be in the collection.
The message to include in the exception when
is not in . The message is shown in
test results.
An array of parameters to use when formatting .
is null, or does not contain
element .
Tests whether the specified collection does not contain the specified
element and throws an exception if the element is in the collection.
The collection in which to search for the element.
The element that is expected not to be in the collection.
is null, or contains
element .
Tests whether the specified collection does not contain the specified
element and throws an exception if the element is in the collection.
The collection in which to search for the element.
The element that is expected not to be in the collection.
The message to include in the exception when
is in . The message is shown in test
results.
is null, or contains
element .
Tests whether the specified collection does not contain the specified
element and throws an exception if the element is in the collection.
The collection in which to search for the element.
The element that is expected not to be in the collection.
The message to include in the exception when
is in . The message is shown in test
results.
An array of parameters to use when formatting .
is null, or contains
element .
Tests whether all items in the specified collection are non-null and throws
an exception if any element is null.
The collection in which to search for null elements.
is null, or contains a null element.
Tests whether all items in the specified collection are non-null and throws
an exception if any element is null.
The collection in which to search for null elements.
The message to include in the exception when
contains a null element. The message is shown in test results.
is null, or contains a null element.
Tests whether all items in the specified collection are non-null and throws
an exception if any element is null.
The collection in which to search for null elements.
The message to include in the exception when
contains a null element. The message is shown in test results.
An array of parameters to use when formatting .
is null, or contains a null element.
Tests whether all items in the specified collection are unique or not and
throws if any two elements in the collection are equal.
The collection in which to search for duplicate elements.
is null, or contains at least one duplicate
element.
Tests whether all items in the specified collection are unique or not and
throws if any two elements in the collection are equal.
The collection in which to search for duplicate elements.
The message to include in the exception when
contains at least one duplicate element. The message is shown in
test results.
is null, or contains at least one duplicate
element.
Tests whether all items in the specified collection are unique or not and
throws if any two elements in the collection are equal.
The collection in which to search for duplicate elements.
The message to include in the exception when
contains at least one duplicate element. The message is shown in
test results.
An array of parameters to use when formatting .
is null, or contains at least one duplicate
element.
Tests whether one collection is a subset of another collection and
throws an exception if any element in the subset is not also in the
superset.
The collection expected to be a subset of .
The collection expected to be a superset of .
is null, or is null,
or contains at least one element not contained in
.
Tests whether one collection is a subset of another collection and
throws an exception if any element in the subset is not also in the
superset.
The collection expected to be a subset of .
The collection expected to be a superset of .
The message to include in the exception when an element in
is not found in .
The message is shown in test results.
is null, or is null,
or contains at least one element not contained in
.
Tests whether one collection is a subset of another collection and
throws an exception if any element in the subset is not also in the
superset.
The collection expected to be a subset of .
The collection expected to be a superset of .
The message to include in the exception when an element in
is not found in .
The message is shown in test results.
An array of parameters to use when formatting .
is null, or is null,
or contains at least one element not contained in
.
Tests whether one collection is not a subset of another collection and
throws an exception if all elements in the subset are also in the
superset.
The collection expected not to be a subset of .
The collection expected not to be a superset of .
is null, or is null,
or all elements of are contained in .
Tests whether one collection is not a subset of another collection and
throws an exception if all elements in the subset are also in the
superset.
The collection expected not to be a subset of .
The collection expected not to be a superset of .
The message to include in the exception when every element in
is also found in .
The message is shown in test results.
is null, or is null,
or all elements of are contained in .
Tests whether one collection is not a subset of another collection and
throws an exception if all elements in the subset are also in the
superset.
The collection expected not to be a subset of .
The collection expected not to be a superset of .
The message to include in the exception when every element in
is also found in .
The message is shown in test results.
An array of parameters to use when formatting .
is null, or is null,
or all elements of are contained in .
Tests whether two collections contain the same elements and throws an
exception if either collection contains an element not in the other
collection.
The first collection to compare. This contains the elements the test
expects.
The second collection to compare. This is the collection produced by
the code under test.
and nullabilities don't match,
or if any element was found in one of the collections but not the other.
Tests whether two collections contain the same elements and throws an
exception if either collection contains an element not in the other
collection.
The first collection to compare. This contains the elements the test
expects.
The second collection to compare. This is the collection produced by
the code under test.
The message to include in the exception when an element was found
in one of the collections but not the other. The message is shown
in test results.
and nullabilities don't match,
or if any element was found in one of the collections but not the other.
Tests whether two collections contain the same elements and throws an
exception if either collection contains an element not in the other
collection.
The first collection to compare. This contains the elements the test
expects.
The second collection to compare. This is the collection produced by
the code under test.
The message to include in the exception when an element was found
in one of the collections but not the other. The message is shown
in test results.
An array of parameters to use when formatting .
and nullabilities don't match,
or if any element was found in one of the collections but not the other.
Tests whether two collections contain the same elements and throws an
exception if either collection contains an element not in the other
collection.
The type of values to compare.
The first collection to compare. This contains the elements the test
expects.
The second collection to compare. This is the collection produced by
the code under test.
The compare implementation to use when comparing elements of the collection.
and nullabilities don't match,
or if any element was found in one of the collections but not the other.
Tests whether two collections contain the same elements and throws an
exception if either collection contains an element not in the other
collection.
The type of values to compare.
The first collection to compare. This contains the elements the test
expects.
The second collection to compare. This is the collection produced by
the code under test.
The compare implementation to use when comparing elements of the collection.
The message to include in the exception when an element was found
in one of the collections but not the other. The message is shown
in test results.
and nullabilities don't match,
or if any element was found in one of the collections but not the other.
Tests whether two collections contain the same elements and throws an
exception if either collection contains an element not in the other
collection.
The type of values to compare.
The first collection to compare. This contains the elements the test
expects.
The second collection to compare. This is the collection produced by
the code under test.
The compare implementation to use when comparing elements of the collection.
The message to include in the exception when an element was found
in one of the collections but not the other. The message is shown
in test results.
An array of parameters to use when formatting .
and nullabilities don't match,
or if any element was found in one of the collections but not the other.
Tests whether two collections contain the different elements and throws an
exception if the two collections contain identical elements without regard
to order.
The first collection to compare. This contains the elements the test
expects to be different than the actual collection.
The second collection to compare. This is the collection produced by
the code under test.
and nullabilities don't match,
or if collections contain the same elements, including the same number of duplicate
occurrences of each element.
Tests whether two collections contain the different elements and throws an
exception if the two collections contain identical elements without regard
to order.
The first collection to compare. This contains the elements the test
expects to be different than the actual collection.
The second collection to compare. This is the collection produced by
the code under test.
The message to include in the exception when
contains the same elements as . The message
is shown in test results.
and nullabilities don't match,
or if collections contain the same elements, including the same number of duplicate
occurrences of each element.
Tests whether two collections contain the different elements and throws an
exception if the two collections contain identical elements without regard
to order.
The first collection to compare. This contains the elements the test
expects to be different than the actual collection.
The second collection to compare. This is the collection produced by
the code under test.
The message to include in the exception when
contains the same elements as . The message
is shown in test results.
An array of parameters to use when formatting .
and nullabilities don't match,
or if collections contain the same elements, including the same number of duplicate
occurrences of each element.
Tests whether two collections contain the different elements and throws an
exception if the two collections contain identical elements without regard
to order.
The type of values to compare.
The first collection to compare. This contains the elements the test
expects to be different than the actual collection.
The second collection to compare. This is the collection produced by
the code under test.
The compare implementation to use when comparing elements of the collection.
and nullabilities don't match,
or if collections contain the same elements, including the same number of duplicate
occurrences of each element.
Tests whether two collections contain the different elements and throws an
exception if the two collections contain identical elements without regard
to order.
The type of values to compare.
The first collection to compare. This contains the elements the test
expects to be different than the actual collection.
The second collection to compare. This is the collection produced by
the code under test.
The compare implementation to use when comparing elements of the collection.
The message to include in the exception when
contains the same elements as . The message
is shown in test results.
and nullabilities don't match,
or if collections contain the same elements, including the same number of duplicate
occurrences of each element.
Tests whether two collections contain the different elements and throws an
exception if the two collections contain identical elements without regard
to order.
The type of values to compare.
The first collection to compare. This contains the elements the test
expects to be different than the actual collection.
The second collection to compare. This is the collection produced by
the code under test.
The compare implementation to use when comparing elements of the collection.
The message to include in the exception when
contains the same elements as . The message
is shown in test results.
An array of parameters to use when formatting .
and nullabilities don't match,
or if collections contain the same elements, including the same number of duplicate
occurrences of each element.
Tests whether all elements in the specified collection are instances
of the expected type and throws an exception if the expected type is
not in the inheritance hierarchy of one or more of the elements.
The collection containing elements the test expects to be of the
specified type.
The expected type of each element of .
is null or, is null,
or some elements of do not inherit/implement
.
Tests whether all elements in the specified collection are instances
of the expected type and throws an exception if the expected type is
not in the inheritance hierarchy of one or more of the elements.
The collection containing elements the test expects to be of the
specified type.
The expected type of each element of .
The message to include in the exception when an element in
is not an instance of
. The message is shown in test results.
is null or, is null,
or some elements of do not inherit/implement
.
Tests whether all elements in the specified collection are instances
of the expected type and throws an exception if the expected type is
not in the inheritance hierarchy of one or more of the elements.
The collection containing elements the test expects to be of the
specified type.
The expected type of each element of .
The message to include in the exception when an element in
is not an instance of
. The message is shown in test results.
An array of parameters to use when formatting .
is null or, is null,
or some elements of do not inherit/implement
.
Tests whether the specified collections are equal and throws an exception
if the two collections are not equal. Equality is defined as having the same
elements in the same order and quantity. Whether two elements are the same
is checked using method.
Different references to the same value are considered equal.
The first collection to compare. This is the collection the tests expects.
The second collection to compare. This is the collection produced by the
code under test.
Thrown if is not equal to
.
Tests whether the specified collections are equal and throws an exception
if the two collections are not equal. Equality is defined as having the same
elements in the same order and quantity. Whether two elements are the same
is checked using method.
Different references to the same value are considered equal.
The first collection to compare. This is the collection the tests expects.
The second collection to compare. This is the collection produced by the
code under test.
The message to include in the exception when
is not equal to . The message is shown in
test results.
Thrown if is not equal to
.
Tests whether the specified collections are equal and throws an exception
if the two collections are not equal. Equality is defined as having the same
elements in the same order and quantity. Whether two elements are the same
is checked using method.
Different references to the same value are considered equal.
The first collection to compare. This is the collection the tests expects.
The second collection to compare. This is the collection produced by the
code under test.
The message to include in the exception when
is not equal to . The message is shown in
test results.
An array of parameters to use when formatting .
Thrown if is not equal to
.
Tests whether the specified collections are unequal and throws an exception
if the two collections are equal. Equality is defined as having the same
elements in the same order and quantity. Whether two elements are the same
is checked using method.
Different references to the same value are considered equal.
The first collection to compare. This is the collection the tests expects
not to match .
The second collection to compare. This is the collection produced by the
code under test.
Thrown if is equal to .
Tests whether the specified collections are unequal and throws an exception
if the two collections are equal. Equality is defined as having the same
elements in the same order and quantity. Whether two elements are the same
is checked using method.
Different references to the same value are considered equal.
The first collection to compare. This is the collection the tests expects
not to match .
The second collection to compare. This is the collection produced by the
code under test.
The message to include in the exception when
is equal to . The message is shown in
test results.
Thrown if is equal to .
Tests whether the specified collections are unequal and throws an exception
if the two collections are equal. Equality is defined as having the same
elements in the same order and quantity. Whether two elements are the same
is checked using method.
Different references to the same value are considered equal.
The first collection to compare. This is the collection the tests expects
not to match .
The second collection to compare. This is the collection produced by the
code under test.
The message to include in the exception when
is equal to . The message is shown in
test results.
An array of parameters to use when formatting .
Thrown if is equal to .
Tests whether the specified collections are equal and throws an exception
if the two collections are not equal. Equality is defined as having the same
elements in the same order and quantity. Different references to the same
value are considered equal.
The first collection to compare. This is the collection the tests expects.
The second collection to compare. This is the collection produced by the
code under test.
The compare implementation to use when comparing elements of the collection.
Thrown if is not equal to
.
Tests whether the specified collections are equal and throws an exception
if the two collections are not equal. Equality is defined as having the same
elements in the same order and quantity. Different references to the same
value are considered equal.
The first collection to compare. This is the collection the tests expects.
The second collection to compare. This is the collection produced by the
code under test.
The compare implementation to use when comparing elements of the collection.
The message to include in the exception when
is not equal to . The message is shown in
test results.
Thrown if is not equal to
.
Tests whether the specified collections are equal and throws an exception
if the two collections are not equal. Equality is defined as having the same
elements in the same order and quantity. Different references to the same
value are considered equal.
The first collection to compare. This is the collection the tests expects.
The second collection to compare. This is the collection produced by the
code under test.
The compare implementation to use when comparing elements of the collection.
The message to include in the exception when
is not equal to . The message is shown in
test results.
An array of parameters to use when formatting .
Thrown if is not equal to
.
Tests whether the specified collections are unequal and throws an exception
if the two collections are equal. Equality is defined as having the same
elements in the same order and quantity. Different references to the same
value are considered equal.
The first collection to compare. This is the collection the tests expects
not to match .
The second collection to compare. This is the collection produced by the
code under test.
The compare implementation to use when comparing elements of the collection.
Thrown if is equal to .
Tests whether the specified collections are unequal and throws an exception
if the two collections are equal. Equality is defined as having the same
elements in the same order and quantity. Different references to the same
value are considered equal.
The first collection to compare. This is the collection the tests expects
not to match .
The second collection to compare. This is the collection produced by the
code under test.
The compare implementation to use when comparing elements of the collection.
The message to include in the exception when
is equal to . The message is shown in
test results.
Thrown if is equal to .
Tests whether the specified collections are unequal and throws an exception
if the two collections are equal. Equality is defined as having the same
elements in the same order and quantity. Different references to the same
value are considered equal.
The first collection to compare. This is the collection the tests expects
not to match .
The second collection to compare. This is the collection produced by the
code under test.
The compare implementation to use when comparing elements of the collection.
The message to include in the exception when
is equal to . The message is shown in
test results.
An array of parameters to use when formatting .
Thrown if is equal to .
Determines whether the first collection is a subset of the second
collection. If either set contains duplicate elements, the number
of occurrences of the element in the subset must be less than or
equal to the number of occurrences in the superset.
The collection the test expects to be contained in .
The collection the test expects to contain .
True if is a subset of
, false otherwise.
Constructs a dictionary containing the number of occurrences of each
element in the specified collection.
The collection to process.
The equality comparer to use when comparing items.
The number of null elements in the collection.
A dictionary containing the number of occurrences of each element
in the specified collection.
Finds a mismatched element between the two collections. A mismatched
element is one that appears a different number of times in the
expected collection than it does in the actual collection. The
collections are assumed to be different non-null references with the
same number of elements. The caller is responsible for this level of
verification. If there is no mismatched element, the function returns
false and the out parameters should not be used.
The first collection to compare.
The second collection to compare.
The equality comparer to use when comparing items.
The expected number of occurrences of
or 0 if there is no mismatched
element.
The actual number of occurrences of
or 0 if there is no mismatched
element.
The mismatched element (may be null) or null if there is no
mismatched element.
true if a mismatched element was found; false otherwise.
compares the objects using object.Equals.
The string assert.
Gets the singleton instance of the CollectionAssert functionality.
Users can use this to plug-in custom assertions through C# extension methods.
For instance, the signature of a custom assertion provider could be "public static void ContainsWords(this StringAssert customAssert, string value, ICollection substrings)"
Users could then use a syntax similar to the default assertions which in this case is "StringAssert.That.ContainsWords(value, substrings);"
More documentation is at "https://github.com/Microsoft/testfx/docs/README.md".
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string that is expected to contain .
The string expected to occur within .
is null, or is null,
or does not contain .
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string that is expected to contain .
The string expected to occur within .
The comparison method to compare strings .
is null, or is null,
or does not contain .
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string that is expected to contain .
The string expected to occur within .
The message to include in the exception when
is not in . The message is shown in
test results.
is null, or is null,
or does not contain .
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string that is expected to contain .
The string expected to occur within .
The message to include in the exception when
is not in . The message is shown in
test results.
The comparison method to compare strings .
is null, or is null,
or does not contain .
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string that is expected to contain .
The string expected to occur within .
The message to include in the exception when
is not in . The message is shown in
test results.
An array of parameters to use when formatting .
is null, or is null,
or does not contain .
Tests whether the specified string contains the specified substring
and throws an exception if the substring does not occur within the
test string.
The string that is expected to contain .
The string expected to occur within .
The message to include in the exception when
is not in . The message is shown in
test results.
The comparison method to compare strings .
An array of parameters to use when formatting .
is null, or is null,
or does not contain .
Tests whether the specified string begins with the specified substring
and throws an exception if the test string does not start with the
substring.
The string that is expected to begin with .
The string expected to be a prefix of .
is null, or is null,
or does not start with .
Tests whether the specified string begins with the specified substring
and throws an exception if the test string does not start with the
substring.
The string that is expected to begin with .
The string expected to be a prefix of .
The comparison method to compare strings .
is null, or is null,
or does not start with .
Tests whether the specified string begins with the specified substring
and throws an exception if the test string does not start with the
substring.
The string that is expected to begin with .
The string expected to be a prefix of .
The message to include in the exception when
does not begin with . The message is
shown in test results.
is null, or is null,
or does not start with .
Tests whether the specified string begins with the specified substring
and throws an exception if the test string does not start with the
substring.
The string that is expected to begin with .
The string expected to be a prefix of .
The message to include in the exception when
does not begin with . The message is
shown in test results.
An array of parameters to use when formatting .
is null, or is null,
or does not start with .
Tests whether the specified string begins with the specified substring
and throws an exception if the test string does not start with the
substring.
The string that is expected to begin with .
The string expected to be a prefix of .
The message to include in the exception when
does not begin with . The message is
shown in test results.
The comparison method to compare strings .
is null, or is null,
or does not start with .
Tests whether the specified string begins with the specified substring
and throws an exception if the test string does not start with the
substring.
The string that is expected to begin with .
The string expected to be a prefix of .
The message to include in the exception when
does not begin with . The message is
shown in test results.
The comparison method to compare strings .
An array of parameters to use when formatting .
is null, or is null,
or does not start with .
Tests whether the specified string ends with the specified substring
and throws an exception if the test string does not end with the
substring.
The string that is expected to end with .
The string expected to be a suffix of .
is null, or is null,
or does not end with .
Tests whether the specified string ends with the specified substring
and throws an exception if the test string does not end with the
substring.
The string that is expected to end with .
The string expected to be a suffix of .
The comparison method to compare strings .
is null, or is null,
or does not end with .
Tests whether the specified string ends with the specified substring
and throws an exception if the test string does not end with the
substring.
The string that is expected to end with .
The string expected to be a suffix of .
The message to include in the exception when
does not end with . The message is
shown in test results.
is null, or is null,
or does not end with .
Tests whether the specified string ends with the specified substring
and throws an exception if the test string does not end with the
substring.
The string that is expected to end with .
The string expected to be a suffix of .
The message to include in the exception when
does not end with . The message is
shown in test results.
An array of parameters to use when formatting .
is null, or is null,
or does not end with .
Tests whether the specified string ends with the specified substring
and throws an exception if the test string does not end with the
substring.
The string that is expected to end with .
The string expected to be a suffix of .
The message to include in the exception when
does not end with . The message is
shown in test results.
The comparison method to compare strings .
is null, or is null,
or does not end with .
Tests whether the specified string ends with the specified substring
and throws an exception if the test string does not end with the
substring.
The string that is expected to end with .
The string expected to be a suffix of .
The message to include in the exception when
does not end with . The message is
shown in test results.
The comparison method to compare strings .
An array of parameters to use when formatting .
is null, or is null,
or does not end with .
Tests whether the specified string matches a regular expression and
throws an exception if the string does not match the expression.
The string that is expected to match .
The regular expression that is
expected to match.
is null, or is null,
or does not match .
Tests whether the specified string matches a regular expression and
throws an exception if the string does not match the expression.
The string that is expected to match .
The regular expression that is
expected to match.
The message to include in the exception when
does not match . The message is shown in
test results.
is null, or is null,
or does not match .
Tests whether the specified string matches a regular expression and
throws an exception if the string does not match the expression.
The string that is expected to match .
The regular expression that is
expected to match.
The message to include in the exception when
does not match . The message is shown in
test results.
An array of parameters to use when formatting .
is null, or is null,
or does not match .
Tests whether the specified string does not match a regular expression
and throws an exception if the string matches the expression.
The string that is expected not to match .
The regular expression that is
expected to not match.
is null, or is null,
or matches .
Tests whether the specified string does not match a regular expression
and throws an exception if the string matches the expression.
The string that is expected not to match .
The regular expression that is
expected to not match.
The message to include in the exception when
matches . The message is shown in test
results.
is null, or is null,
or matches .
Tests whether the specified string does not match a regular expression
and throws an exception if the string matches the expression.
The string that is expected not to match .
The regular expression that is
expected to not match.
The message to include in the exception when
matches . The message is shown in test
results.
An array of parameters to use when formatting .
is null, or is null,
or matches .
Attribute to define in-line data for a test method.
Initializes a new instance of the class.
Initializes a new instance of the class with an array of object arguments.
The data.
This constructor is only kept for CLS compliant tests.
Initializes a new instance of the class with an array of string arguments.
The string array data.
Initializes a new instance of the class with an array of object arguments.
The data.
Gets the test id generation strategy.
Gets data for calling test method.
Gets or sets display name in test results for customization.
Gets or sets a reason to ignore the specific test case. Setting the property to non-null value will ignore the test case.
Specifies connection string, table name and row access method for data driven testing.
- This works only on .NET Framework and is not supported on .NET Core or later.
-
The following shows example usages for this attribute:
[DataSource("Provider=SQLOLEDB.1;Data Source=source;Integrated Security=SSPI;Initial Catalog=EqtCoverage;Persist Security Info=False", "MyTable")]
[DataSource("dataSourceNameFromConfigFile")].
The default provider name for DataSource.
The default data access method.
Initializes a new instance of the class. This instance will be initialized with a data provider, connection string, data table and data access method to access the data source.
Invariant data provider name, such as System.Data.SqlClient.
Data provider specific connection string.
WARNING: The connection string can contain sensitive data (for example, a password).
The connection string is stored in plain text in source code and in the compiled assembly.
Restrict access to the source code and assembly to protect this sensitive information.
The name of the data table.
Specifies the order to access data.
Initializes a new instance of the class.This instance will be initialized with a connection string and table name.
Specify connection string and data table to access OLEDB data source.
Data provider specific connection string.
WARNING: The connection string can contain sensitive data (for example, a password).
The connection string is stored in plain text in source code and in the compiled assembly.
Restrict access to the source code and assembly to protect this sensitive information.
The name of the data table.
Initializes a new instance of the class. This instance will be initialized with a data provider and connection string associated with the setting name.
The name of a data source found in the <microsoft.visualstudio.qualitytools> section in the app.config file.
Gets a value representing the data provider of the data source.
The data provider name. If a data provider was not designated at object initialization, the default provider of System.Data.OleDb will be returned.
Gets a value representing the connection string for the data source.
Gets a value indicating the table name providing data.
Gets the method used to access the data source.
One of the values. If the is not initialized, this will return the default value .
Gets the name of a data source found in the <microsoft.visualstudio.qualitytools> section in the app.config file.
This attribute doesn't currently provide any different functionality compared to . It's only
present for backward compatibility. Using is recommended, even for parameterized tests.
Initializes a new instance of the class.
Initializes a new instance of the class.
Display name for the test.
Enum to specify whether the data is stored as property or in method.
Data is declared as property.
Data is declared in method.
The data source type is auto-detected.
Attribute to define dynamic data for a test method.
Initializes a new instance of the class.
The name of method or property having test data.
Specifies whether the data is stored as property or in method.
Initializes a new instance of the class.
The name of method or property having test data.
Initializes a new instance of the class when the test data is present in a class different
from test method's class.
The name of method or property having test data.
The declaring type of property or method having data. Useful in cases when declaring type is present in a class different from
test method's class. If null, declaring type defaults to test method's class type.
Specifies whether the data is stored as property or in method.
Initializes a new instance of the class when the test data is present in a class different
from test method's class.
The name of method or property having test data.
The declaring type of property or method having data. Useful in cases when declaring type is present in a class different from
test method's class. If null, declaring type defaults to test method's class type.
Gets or sets the name of method used to customize the display name in test results.
Gets or sets the declaring type used to customize the display name in test results.
Gets or sets a reason to ignore this dynamic data source. Setting the property to non-null value will ignore the dynamic data source.
Specifies how to discover tests.
Initializes a new instance of the class.
The to use when discovering tests.
Gets the discovery option.
The supported discovery modes for tests.
Discover tests during execution.
This was the default option until version 2.2.3.
Discover and expand ITestDataSource based tests.
This is the default behavior after version 2.2.3.
Specifies options for all of the current assembly.
These options can be override by individual attribute.
Initializes a new instance of the class.
The to use when executing parameterized tests.
Gets the test unfolding strategy.
The supported test ID generation strategies.
Uses legacy test ID generation. tests will not be discovered and instead they will be collapsed into one parent test.
This option is incompatible with option of and will be ignored.
This was the default option until version 2.2.3.
Uses a combination of executor ID, file name, fully qualified name and display name to generate the test ID.
This is the default behavior between versions 2.2.4 and 3.0.0.
Uses a combination of executor ID, file path, assembly name, method fully qualified name and serialized data (values and their fully qualified type) to generate the test ID.
This is the default behavior starting with version 3.0.0.
Specifies how to generate test ID.
Initializes a new instance of the class.
The to use when generating the test ID.
Gets the test ID generation strategy.
The assembly cleanup attribute.
The class cleanup attribute.
Initializes a new instance of the class.
Initializes a new instance of the class.
Specifies the ClassCleanup Inheritance Behavior.
Initializes a new instance of the class.
Specifies the class clean-up behavior.
To capture output of class clean-up method in logs
must be set to .
Initializes a new instance of the class.
Specifies the ClassCleanup Inheritance Behavior.
Specifies the class clean-up behavior.
To capture output of class clean-up method in logs
must be set to .
Initializes a new instance of the class.
Specifies the ClassCleanup Inheritance Behavior.
Specifies the class clean-up behavior.
To capture output of class clean-up method in logs
must be set to .
Gets the Inheritance Behavior.
Gets when to run class cleanup methods.
When to run ClassCleanup during test execution.
Run at end of assembly.
Run at end of class.
Specification for when to run class cleanup methods.
Default class cleanup execution.
Initializes a new instance of the class.
Initializes a new instance of the class.
Specifies the class clean-up behavior.
To capture output of class clean-up method in logs
must be set to .
Gets when to run class cleanup methods.
The test cleanup attribute marks methods that are executed after every test marked with a .
Specification to disable parallelization.
Parallel execution mode.
Each thread of execution will be handed a TestClass worth of tests to execute.
Within the TestClass, the test methods will execute serially.
Each thread of execution will be handed TestMethods to execute.
Enumeration for inheritance behavior, that can be used with both the class
and class.
Defines the behavior of the ClassInitialize and ClassCleanup methods of base classes.
The type of the enumeration must match.
None.
Before each derived class.
The assembly initialize attribute.
The class initialize attribute.
Initializes a new instance of the class.
ClassInitializeAttribute.
Initializes a new instance of the class.
ClassInitializeAttribute.
Specifies the ClassInitialize Inheritance Behavior.
Gets the Inheritance Behavior.
The presence of this attribute in a test assembly causes MSTest to discover test classes (i.e. classes having
the "TestClass" attribute) and test methods (i.e. methods having the "TestMethod" attribute) which are declared
internal in addition to test classes and test methods which are declared public. When this attribute is not
present in a test assembly the tests in such classes will not be discovered.
The test initialize attribute.
Specification for parallelization level for a test run.
The default scope for the parallel run. Although method level gives maximum parallelization, the default is set to
class level to enable maximum number of customers to easily convert their tests to run in parallel. In most cases within
a class tests aren't thread safe.
Initializes a new instance of the class.
Gets or sets the number of workers to be used for the parallel run.
Gets or sets the scope of the parallel run.
To enable all classes to run in parallel set this to .
To get the maximum parallelization level set this to .
This attribute is used to conditionally control whether a test class or a test method will run or be ignored, based on a condition and using an optional message.
This attribute isn't inherited. Applying it to a base class will not affect derived classes.
Initializes a new instance of the class.
The condition mode.
Gets the ignore message (in case returns ) indicating
the reason for ignoring the test method or test class.
Gets the group name for this attribute. This is relevant when multiple
attributes that inherit are present.
The ShouldRun values of attributes in the same group are "OR"ed together.
While the value from different groups is "AND"ed together.
In other words, a test will be ignored if any group has all its values as false.
Usually, you can use to return the group name.
Gets a value indicating whether the test method or test class should be ignored.
An enumeration used with to control whether the condition is reversed.
Runs only when the condition is met (the default).
Ignores the test when the condition is met (i.e, reverse the condition).
CSS Iteration URI.
Initializes a new instance of the class for CSS Iteration URI.
The CSS Iteration URI.
Gets the CSS Iteration URI.
CSS Project Structure URI.
Initializes a new instance of the class for CSS Project Structure URI.
The CSS Project Structure URI.
Gets the CSS Project Structure URI.
Specifies a backoff type for the delay between retries.
Specifies a constant backoff type. Meaning the delay between retries is constant.
Specifies an exponential backoff type.
The delay is calculated as the base delay * 2^(n-1) where n is the retry attempt.
For example, if the base delay is 1000ms, the delays will be 1000ms, 2000ms, 4000ms, 8000ms, etc.
Description of the test.
Initializes a new instance of the class to describe a test.
The description.
Gets the description of a test.
Attribute that specifies to expect an exception of the specified type.
We recommend using one of the Assert.ThrowsException or Assert.ThrowsExceptionAsync overload instead of using this attribute.
Initializes a new instance of the class with the expected type.
Type of the expected exception.
Initializes a new instance of the class with
the expected type and the message to include when no exception is thrown by the test.
Type of the expected exception.
Message to include in the test result if the test fails due to not throwing an exception.
Gets a value indicating the Type of the expected exception.
Gets or sets a value indicating whether to allow types derived from the type of the expected exception to
qualify as expected.
Gets the message to include in the test result if the test fails due to not throwing an exception.
Verifies that the type of the exception thrown by the unit test is expected.
The exception thrown by the unit test.
Base class for attributes that specify to expect an exception from a unit test.
We recommend using one of the Assert.ThrowsException or Assert.ThrowsExceptionAsync overload instead of using this attribute.
Initializes a new instance of the class with a default no-exception message.
Initializes a new instance of the class with a no-exception message.
Message to include in the test result if the test fails due to not throwing an
exception.
Gets the message to include in the test result if the test fails due to not throwing an exception.
Gets the message to include in the test result if the test fails due to not throwing an exception.
Gets the default no-exception message.
The ExpectedException attribute type name.
The default no-exception message.
Determines whether the exception is expected. If the method returns, then it is
understood that the exception was expected. If the method throws an exception, then it
is understood that the exception was not expected, and the thrown exception's message
is included in the test result. The class can be used for
convenience. If is used and the assertion fails,
then the test outcome is set to Inconclusive.
The exception thrown by the unit test.
Rethrow the exception if it is an AssertFailedException or an AssertInconclusiveException.
The exception to rethrow if it is an assertion exception.
GitHubWorkItem attribute; used to specify a GitHub issue associated with this test.
Initializes a new instance of the class for the GitHub WorkItem Attribute.
The URL to a GitHub issue, pull request, or discussion.
Gets the URL to the GitHub issue associated.
Extracts the ID from the GitHub issue/pull/discussion URL.
The URL to a GitHub ticket.
The ticket ID.
Pattern:
https:\\/\\/github\\.com\\/.+\\/.+\\/(issues|pull|discussions)\\/(\\d+)(#.+)?
Explanation:
â—‹ Match the string "https://github.com/".
â—‹ Match a character other than '\n' greedily at least once.
â—‹ Match '/'.
â—‹ Match a character other than '\n' greedily at least once.
â—‹ Match '/'.
â—‹ 1st capture group.
â—‹ Match with 3 alternative expressions.
â—‹ Match the string "issues".
â—‹ Match the string "pull".
â—‹ Match the string "discussions".
â—‹ Match '/'.
â—‹ 2nd capture group.
â—‹ Match a Unicode digit greedily at least once.
â—‹ Optional (greedy).
â—‹ 3rd capture group.
â—‹ Match '#'.
â—‹ Match a character other than '\n' atomically at least once.
This attribute is used to ignore a test class or a test method, with an optional message.
This attribute isn't inherited. Applying it to a base class will not cause derived classes to be ignored.
Initializes a new instance of the class with an empty message.
Initializes a new instance of the class.
Message specifies reason for ignoring.
Gets the ignore message indicating the reason for ignoring the test method or test class.
An enum that is used with to control which operating systems a test method or test class supports or doesn't support.
Represents the Linux operating system.
Representing the MacOS operating system.
Represents the Windows operating system.
Represents the FreeBSD operating system.
This attribute is used to ignore a test class or a test method, with an optional message.
This attribute isn't inherited. Applying it to a base class will not cause derived classes to be ignored.
Initializes a new instance of the class.
Decides whether the OSes will be included or excluded.
The operating systems that this test includes/excludes.
Initializes a new instance of the class.
The operating systems that this test supports.
Gets a value indicating whether the test method or test class should be ignored.
Gets the ignore message (in case returns ).
Gets the group name for this attribute.
Test Owner.
Initializes a new instance of the class.
The owner.
Gets the owner.
Priority attribute; used to specify the priority of a unit test.
Initializes a new instance of the class.
The priority.
Gets the priority.
This attribute is used to set a retry count on a test method in case of failure.
Initializes a new instance of the class with the given number of max retries.
The maximum number of retry attempts. This must be greater than or equal to 1.
Gets the number of retries that the test should make in case of failures.
Note that before RetryAttribute is considered, the test was already executed once.
This property determines the max number of retries after the first normal run.
Gets or sets the delay, in milliseconds, between retries.
This delay is also applied after the first run and before the first retry attempt.
Gets or sets the delay backoff type.
Retries the test method times in case of failure.
Note that a first run of the method was already executed and failed before this method is called.
An object to encapsulate the state needed for retry execution.
Returns a object that contains the results of all attempts. Only
the last added element is used to determine the test outcome.
The other results are currently not used, but may be used in the future for tooling to show the
state of the failed attempts.
An abstract attribute that controls retrying a test method if it failed. It's up to the derived classes to
define how the retry is done.
Retries the test method. The details of how retry is done is left to the derived classes.
Note that a first run of the method was already executed and failed before this method is called.
An object to encapsulate the state needed for retry execution.
Returns a object that contains the results of all attempts. Only
the last added element is used to determine the test outcome.
The other results are currently not used, but may be used in the future for tooling to show the
state of the failed attempts.
Represents the context for a test retry.
Gets the function that will execute the test asynchronously.
The result of a test retry.
Adds a set of test results to the retry result.
The test results for the current attempt.
The test class attribute.
The test class attribute.
Initializes a new instance of the class.
Initializes a new instance of the class.
Display name for the test.
TestCategory attribute; used to specify the category of a unit test.
Initializes a new instance of the class and applies the category to the test.
The test Category.
Gets the test categories that has been applied to the test.
Base class for the "Category" attribute.
The reason for this attribute is to let the users create their own implementation of test categories.
- test framework (discovery, etc) deals with TestCategoryBaseAttribute.
- The reason that TestCategories property is a collection rather than a string,
is to give more flexibility to the user. For instance the implementation may be based on enums for which the values can be OR'ed
in which case it makes sense to have single attribute rather than multiple ones on the same test.
Initializes a new instance of the class.
Applies the category to the test. The strings returned by TestCategories
are used with the /category command to filter tests.
Gets the test category that has been applied to the test.
This attribute is used to mark test classes.
Test classes must be:
- public, or if is used then it can be internal.
- not static
- not generic
Gets a test method attribute that enables running this test.
The test method attribute instance defined on this method.
The to be used to run this test.
Extensions can override this method to customize how all methods in a class are run.
This attribute is used to mark test methods.
-
When using other attributes like or , it
the use of is still required.
-
Test methods must be:
- public, or if is used then it can be internal.
- not static
- not generic
- not abstract
- return type is either , , or . If , then it shouldn't be .
Initializes a new instance of the class.
Initializes a new instance of the class.
Display name for the test.
Gets display name for the test.
Executes a test method.
The test method to execute.
An array of TestResult objects that represent the outcome(s) of the test.
Extensions can override this method to customize running a TestMethod.
The test property attribute.
Initializes a new instance of the class.
The name.
The value.
Gets the name.
Gets the value.
TestResult object to be returned to adapter.
Initializes a new instance of the class.
Gets or sets the display name of the result. Useful when returning multiple results.
If null then Method name is used as DisplayName.
Gets or sets the outcome of the test execution.
Gets or sets the exception thrown when test is failed.
Gets or sets the output of the message logged by test code.
Gets or sets the output of the message logged by test code.
Gets or sets the debug traces by test code.
Gets or sets the debug traces by test code.
Gets or sets the execution id of the result.
Gets or sets the parent execution id of the result.
Gets or sets the inner results count of the result.
Gets or sets the duration of test execution.
Gets or sets the data row index in data source. Set only for results of individual
run of data row of a data driven test.
Gets or sets the return value of the test method. (Currently null always).
Gets or sets the result files attached by the test.
Enumeration for timeouts, that can be used with the class.
The type of the enumeration must match.
The infinite.
Timeout attribute; used to specify the timeout of a unit test.
Initializes a new instance of the class.
The timeout in milliseconds.
Initializes a new instance of the class with a preset timeout.
The timeout.
Gets the timeout in milliseconds.
Gets or sets a value indicating whether the test method should be cooperatively canceled on timeout.
When set to , the cancellation token is canceled on timeout, and the method completion is awaited.
The test method and all the code it calls, must be designed in a way that it observes the cancellation and cancels
cooperatively. If the test method does not complete, the timeout does not force it to complete.
When set to , the cancellation token is canceled on timeout, timeout result is reported and the
method task will continue running on background. This may lead to conflicts in file access on test cleanup, unobserved
exceptions, and memory leaks.
Gets a value indicating whether the instance has the correct test timeout signature.
WorkItem attribute; used to specify a work item associated with this test.
Initializes a new instance of the class for the WorkItem Attribute.
The Id to a work item.
Gets the Id to a work item associated.
Constants used throughout.
Enumeration for how we access data rows in data driven testing.
Rows are returned in sequential order.
Rows are returned in random order.
AssertFailedException class. Used to indicate failure for a test case.
Initializes a new instance of the class.
The message.
The exception.
Initializes a new instance of the class.
The message.
Initializes a new instance of the class.
Initializes a new instance of the class.
Serialization info.
Streaming context.
The assert inconclusive exception.
Initializes a new instance of the class.
The message.
The exception.
Initializes a new instance of the class.
The message.
Initializes a new instance of the class.
Initializes a new instance of the class.
Serialization info.
Streaming context.
InternalTestFailureException class. Used to indicate internal failure for a test case.
This class is only added to preserve source compatibility with the V1 framework.
For all practical purposes either use AssertFailedException/AssertInconclusiveException.
Initializes a new instance of the class.
The exception message.
The exception.
Initializes a new instance of the class.
The exception message.
Initializes a new instance of the class.
Initializes a new instance of the class.
Serialization info.
Streaming context.
Base class for Framework Exceptions.
Initializes a new instance of the class.
Initializes a new instance of the class.
The message.
The exception.
Initializes a new instance of the class.
The message.
Initializes a new instance of the class.
Serialization info.
Streaming context.
This class is designed to help user doing unit testing for types which uses generic types.
GenericParameterHelper satisfies some common generic type constraints
such as:
1. public default constructor
2. implements common interface: IComparable, IEnumerable.
Initializes a new instance of the class that
satisfies the 'newable' constraint in C# generics.
This constructor initializes the Data property to a random value.
Initializes a new instance of the class that
initializes the Data property to a user-supplied value.
Any integer value.
Gets or sets the Data.
Do the value comparison for two GenericParameterHelper object.
object to do comparison with.
true if obj has the same value as 'this' GenericParameterHelper object.
false otherwise.
Returns a hashcode for this object.
The hash code.
Compares the data of the two objects.
The object to compare with.
A signed number indicating the relative values of this instance and value.
Thrown when the object passed in is not an instance of .
Returns an IEnumerator object whose length is derived from
the Data property.
The IEnumerator object.
Returns a GenericParameterHelper object that is equal to
the current object.
The cloned object.
Test data source for data driven tests.
Gets the test data from custom test data source.
The method info of test method.
Test data for calling test method.
Gets the display name corresponding to test data row for displaying in TestResults.
The method info of test method.
The test data which is passed to test method.
The .
Returns the method/property name accessed by this data source.
For example, for DynamicDataAttribute, that will be attribute argument.
Returns the type name on which the method/property accessed by this data source exists.
Specifies the capability of a test data source to be ignored and define the ignore reason.
Gets or sets a reason to ignore the test data source. Setting the property to non-null value will ignore the test data source.
Specifies the capability of a test data source to define how parameterized tests should be executed, either as
individual test cases for each data row or as a single test case. This affects the test results and the UI
representation of the tests.
Gets the strategy for unfolding parameterized tests.
Specifies how parameterized tests should be executed, either as individual test cases for each data row or as a
single test case. This affects the test results and the UI representation of the tests.
MSTest will decide whether to unfold the parameterized test based on value from the assembly level attribute
. If no assembly level attribute is specified, then the default
configuration is to unfold.
Each data row is treated as a separate test case.
The parameterized test is not unfolded; all data rows are treated as a single test case.
TestMethod for execution.
Gets the name of test method.
Gets the name of test class.
Gets the return type of test method.
Gets the arguments with which test method is invoked.
Gets the parameters of test method.
Gets the methodInfo for test method.
This is just to retrieve additional information about the method.
Do not directly invoke the method using MethodInfo. Use ITestMethod.Invoke instead.
Invokes the test method.
Arguments to pass to test method. (E.g. For data driven).
Result of test method invocation.
This call handles asynchronous test methods as well.
Get all attributes of the test method.
Whether attribute defined in parent class is valid.
All attributes.
Get attribute of specific type.
System.Attribute type.
Whether attribute defined in parent class is valid.
The attributes of the specified type.
Recursively resolve collections of objects to a proper string representation.
The method arguments.
The strategy for creating the test ID.
The humanized representation of the data.
Provides helper functionality for the unit test framework.
Gets the exception messages, including the messages for all inner exceptions
recursively.
Exception to get messages for.
string with error message information.
Enables users to log/write traces from unit tests for diagnostics.
Handler for LogMessage.
Message to log.
Event to listen. Raised when unit test writer writes some message.
Mainly to consume by adapter.
API for test writer to call to Log messages.
String format with placeholders.
Parameters for placeholders.
A strongly-typed resource class, for looking up localized strings, etc.
Returns the cached ResourceManager instance used by this class.
Overrides the current thread's CurrentUICulture property for all
resource lookups using this strongly typed resource class.
Looks up a localized string similar to Access string has invalid syntax..
Looks up a localized string similar to The expected collection contains {1} occurrence(s) of <{2}>. The actual collection contains {3} occurrence(s). {0}.
Looks up a localized string similar to Duplicate item found:<{1}>. {0}.
Looks up a localized string similar to Expected:<{1}>. Case is different for actual value:<{2}>. {0}.
Looks up a localized string similar to Expected a difference no greater than <{3}> between expected value <{1}> and actual value <{2}>. {0}.
Looks up a localized string similar to Expected:<{1} ({2})>. Actual:<{3} ({4})>. {0}.
Looks up a localized string similar to Expected:<{1}>. Actual:<{2}>. {0}.
Looks up a localized string similar to Expected a difference greater than <{3}> between expected value <{1}> and actual value <{2}>. {0}.
Looks up a localized string similar to Expected any value except:<{1}>. Actual:<{2}>. {0}.
Looks up a localized string similar to Do not pass value types to AreSame(). Values converted to Object will never be the same. Consider using AreEqual(). {0}.
Looks up a localized string similar to Type '{0}' is not assignable to '{1}'..
Looks up a localized string similar to {0} failed. {1}.
Looks up a localized string similar to async TestMethod with UITestMethodAttribute are not supported. Either remove async or use TestMethodAttribute..
Looks up a localized string similar to UITestMethodAttribute.DispatcherQueue should not be null. To use UITestMethodAttribute within a WinUI Desktop App, remember to set the static UITestMethodAttribute.DispatcherQueue during the test initialization..
Looks up a localized string similar to Both collections are empty. {0}.
Looks up a localized string similar to Both collection contain same elements..
Looks up a localized string similar to Both collection references point to the same collection object. {0}.
Looks up a localized string similar to Both collections contain the same elements. {0}.
Looks up a localized string similar to {0}. {1}.
Looks up a localized string similar to (null).
Looks up a localized string similar to (object).
Looks up a localized string similar to String '{0}' does not contain string '{1}'. {2}..
Looks up a localized string similar to {0} ({1}).
Looks up a localized string similar to String '{0}' does contain string '{1}'. {2}..
Looks up a localized string similar to Assert.Equals should not be used for Assertions. Please use Assert.AreEqual & overloads instead..
Looks up a localized string similar to Method {0} must match the expected signature: public static {1} {0}({2})..
Looks up a localized string similar to Property or method {0} on {1} returns empty IEnumerable<object[]>..
Looks up a localized string similar to Property or method {0} on {1} return type is not assignable to 'IEnumerable'..
Looks up a localized string similar to Dynamic data method '{0}' should be static, parameterless and non-generic..
Looks up a localized string similar to Dynamic data property '{0}' should be static and have a getter..
Looks up a localized string similar to The dynamic data source '{0}' in type '{1}' should exist and be a property or a method..
Looks up a localized string similar to Value returned by property or method {0} shouldn't be null..
Looks up a localized string similar to The number of elements in the collections do not match. Expected:<{1}>. Actual:<{2}>.{0}.
Looks up a localized string similar to Element at index {0} do not match.
Expected: {1}
Actual: {2}.
Looks up a localized string similar to Element at index {1} is not of expected type. Expected type:<{2}>. Actual type:<{3}>.{0}.
Looks up a localized string similar to String '{0}' does not end with string '{1}'. {2}..
Looks up a localized string similar to Expected collection of size {1}. Actual: {2}. {0}.
Looks up a localized string similar to Invalid GitHub ticket URL.
Looks up a localized string similar to The property {0} has type {1}; expected type {2}..
Looks up a localized string similar to {0} Expected type:<{1}>. Actual type:<{2}>..
Looks up a localized string similar to String '{0}' does not match pattern '{1}'. {2}..
Looks up a localized string similar to Expected collection to contain any item but it is empty. {0}.
Looks up a localized string similar to Wrong Type:<{1}>. Actual type:<{2}>. {0}.
Looks up a localized string similar to String '{0}' matches pattern '{1}'. {2}..
Looks up a localized string similar to Expected exception type:<{1}> but no exception was thrown. {0}.
Looks up a localized string similar to The parameter '{0}' is invalid. The value cannot be null. {1}..
Looks up a localized string similar to Different number of elements..
Looks up a localized string similar to
The constructor with the specified signature could not be found. You might need to regenerate your private accessor,
or the member may be private and defined on a base class. If the latter is true, you need to pass the type
that defines the member into PrivateObject's constructor.
.
Looks up a localized string similar to
The member specified ({0}) could not be found. You might need to regenerate your private accessor,
or the member may be private and defined on a base class. If the latter is true, you need to pass the type
that defines the member into PrivateObject's constructor.
.
Looks up a localized string similar to String '{0}' does not start with string '{1}'. {2}..
Looks up a localized string similar to The expected exception type must be System.Exception or a type derived from System.Exception..
Looks up a localized string similar to (Failed to get the message for an exception of type {0} due to an exception.).
Looks up a localized string similar to Test method did not throw expected exception {0}. {1}.
Looks up a localized string similar to Test method did not throw an exception. An exception was expected by attribute {0} defined on the test method..
Looks up a localized string similar to Test method threw exception {0}, but exception {1} was expected. Exception message: {2}.
Looks up a localized string similar to Test method threw exception {0}, but exception {1} or a type derived from it was expected. Exception message: {2}.
Looks up a localized string similar to Expected exception type:<{1}>. Actual exception type:<{2}>. {0}.
When this type is returned from (for example, through ), it
determines information related to the specific test case.
The type parameter corresponding to the type of the value held by this type. It can be a tuple for test methods with more than one parameter.
Initializes a new instance of the class.
The value to be held by this instance, which could be a or if the test method has more than one parameter.
Gets the value held by this instance.
Gets or sets the ignore message. A non-null value means the test case is ignored with the message provided.
Gets or sets the display name for the test case.
unit test outcomes.
Test was executed, but there were issues.
Issues may involve exceptions or failed assertions.
Test has completed, but we can't say if it passed or failed.
May be used for aborted tests.
Test was executed without any issues.
Test is currently executing.
There was a system error while we were trying to execute a test.
The test timed out.
Test was aborted by the user.
Test is in an unknown state.
Test cannot be executed.
The specific test cannot be found.
Test is marked as ignored.
Custom -derived type for the GitHubTicketRegex method.
Cached, thread-safe singleton instance.
Initializes the instance.
Provides a factory for creating instances to be used by methods on .
Creates an instance of a used by methods on .
Provides the runner that contains the custom logic implementing the specified regular expression.
Scan the starting from base.runtextstart for the next match.
The text being scanned by the regular expression.
Search starting from base.runtextpos for the next location a match could possibly start.
The text being scanned by the regular expression.
true if a possible match was found; false if no more matches are possible.
Determine whether at base.runtextpos is a match for the regular expression.
The text being scanned by the regular expression.
true if the regular expression matches at the current position; otherwise, false.
Helper methods used by generated -derived implementations.
Default timeout value set in , or if none was set.
Whether is non-infinite.
Pushes 2 values onto the backtracking stack.
Supports searching for the string "https://github.com/".